©2016 by Stone Top Inc. Created by Fierce, Inc.

(813) 246-4036

8100 E Broadway Ave Ste. J,

Tampa, FL 33619, USA

OUR PROCESS

There are many natural stone distributors in our area where you can select your slabs or you can visit our showroom to select your stones. From there we take your stone and masterfully craft it to your needs. Take a look!

THE STONE IS TEMPLATED

A StoneTop Templator will do a site visit and measure the cabinets. During that visit, all details are verified and approved by you, the customer. Also, any questions or concerns that you may have can be addressed during this visit.

image 1-13-2017-15.jpg
image 1-13-2017-13.jpg

THE STONE IS PROCESSED

Once the template is complete, we will review and verify that all details have been determined, such as seam placement. We will then order the material for delivery.

THE STONE IS CUT

During this process, the saw operator lays the templates out on the slab and marks the cuts to be made.  A digital bridge saw makes the rough cuts.

image 1-13-2017-9.jpg
image 1-13-2017-7.jpg

THE STONE IS FABRICATED

The fabricator will prepare the finished edges and make the cutouts for the sink, cooktop or other appliances.

THE STONE IS POLISHED

We use a multi-step process to ensure that the finished product is smooth and consistent.

image 1-13-2017-6.jpg
20170320_114657.jpg

THE STONE TOP IS INSTALLED

First, we will place, secure and level all tops.  Then, we finish any seams using a colored match adhesive. Next, we will mount the sink to the stone and secure it. Finally, we caulk all splash using 100% silicone. For natural stone, we will also apply a sealant.

WHAT THEY SAY ABOUT US

"It went great!  The two employees that came out to install were very detailed-oriented and installed everything as it if was their kitchen.  The under-mount sink went in well and I love the new look.

 

Clint S., Lutz, FL